Representative category image — product photo coming soonFoam Ceramic Filter
FCF-2 Foam Ceramic Filter for Iron Castings
FCF-2 foam ceramic filter for ductile and grey iron castings: fewer inclusion defects, better machinability and mechanical properties, and higher casting yield.
- Series
- FCF-2
- Type
- Foam ceramic filter
- Geometry
- Rectangular / round (Φ)
Product overview
FCF-2 foam ceramic filters are mainly used for ductile and grey iron castings. They deliver excellent results in reducing inclusion defects, improving machinability and mechanical properties, and increasing the overall yield of the casting.
Features
- Fewer inclusion defects: inclusion defects are reduced by over 50% (reject ratio from 6% without filter to 1% with filter).
- Improved machinability: tool life is increased by over 30% (from 4 h to 7 h).
- Improved mechanical properties: mechanical properties are increased by more than 10% (ductile iron elongation from 8% to 10%).
- Higher casting yield: overall yield is increased by over 10% (ductile iron yield from 65% to 71%).
Using Guide
PPI selection: ductile iron: 10, 15 PPI — grey iron / copper: 10, 15, 20 PPI.
Filtered weight: grey iron max. 4 kg/cm²; ductile iron max. 2 kg/cm².
Regular sizes
| Size (mm) | Max. filtered weight (kg) | Normal flow rate (kg/cm³) | ||
|---|---|---|---|---|
| Ductile | Grey | Ductile | Grey | |
| 30×50×22 | 30 | 60 | 3 | 4 |
| 40×40×22 | 32 | 64 | 3 | 4 |
| 50×50×22 | 50 | 100 | 4 | 6 |
| 75×50×22 | 75 | 150 | 6 | 9 |
| 100×50×22 | 100 | 200 | 8 | 12 |
| 75×75×22 | 110 | 220 | 9 | 14 |
| 100×75×22 | 150 | 300 | 12 | 18 |
| 100×100×22 | 200 | 400 | 16 | 24 |
| 150×100×22 | 300 | 600 | 24 | 36 |
| 150×150×22 | 450 | 900 | 36 | 54 |
| 200×200×40 | 800 | 1600 | 64 | 95 |
| Φ40×11 | 20 | 40 | 2 | 3 |
| Φ50×22 | 35 | 70 | 3 | 4.5 |
| Φ60×22 | 50 | 100 | 4.2 | 6.5 |
| Φ70×22 | 75 | 150 | 5.5 | 8.8 |
| Φ80×22 | 100 | 200 | 7.2 | 11 |
| Φ90×22 | 120 | 240 | 9 | 14 |
| Φ100×22 | 140 | 280 | 11 | 17 |
| Φ150×22 | 350 | 700 | 25 | 38 |
| Φ200×40 | 620 | 1240 | 44 | 67 |
- Filtering area: the filter area should be 2–4 times the area of the normal gate section. This allows for flow baffling of the liquid metal and for partial blocking of the filter during pouring.
- Location: the filter can be placed anywhere in the gating system; however, the best results are obtained when it is close to the casting.
- In a direct pouring system, the metal stream height should not exceed 300 mm.
Storage and Shelf Life
Store in a cool, dry place, away from moisture and without pressure. Shelf life: 3 years.
Key advantages
- Fewer inclusion defects
- Improved machinability
- Improved mechanical properties
- Higher casting yield
Technical specifications
| Property | Value / range |
|---|---|
| FCF-2A — Compression strength | ≥ 1.0 MPa |
| FCF-2A — Bulk density | 0.38–0.45 g/cm³ |
| FCF-2A — Porosity | 80–87% |
| FCF-2A — Operating temperature | ≤ 1460 °C |
| FCF-2C — Compression strength | ≥ 1.5 MPa |
| FCF-2C — Bulk density | 0.40–0.55 g/cm³ |
| FCF-2C — Porosity | 80–87% |
| FCF-2C — Operating temperature | ≤ 1500 °C |
| Application scope | Iron, copper |
| PPI selection | Ductile: 10, 15 — Grey/copper: 10, 15, 20 |
| Filtered weight | Grey iron max. 4 kg/cm² — Ductile iron max. 2 kg/cm² |
| Storage | Cool, dry place, away from moisture, no pressure |
| Shelf life | 3 years |
Applications & selection guide
Filters- Ductile iron castings
- Grey iron castings
- Copper castings
Need technical advice to choose the right product?
Our technical team recommends the right option for your process, alloy and casting size.
Request a Quote







